KAIST

NEWS

홈페이지 통합검색

-
KOREAN

IP

Professor Yang Named Recipient of Dupont Science & Technology Award Professor Yang Named Recipient of Dupont Science & Technology Award - Named as the recipient of Dupont Science & Technology Award of 2007- In recognition of his development of optical?bio-functional photonic crystal structures through Self-assembly of nanoparticles Seung-Man Yang, a professor of Chemical and Biomolecular Engineering of KAIST (President Nam Pyo Suh) and the president of the National Creative Research Initiatives Center for Photon and Fluid Integrated Circuit by the Ministry of Science and Technology, has been named as the recipient of Dupont Science & Technology Award. Dupont Korea, associate of Dupont, a world-class science firm, has established and conferred ‘Dupont Science & Technology Award’ since 2002 to promote basic sciences and industrial development of Korea. Dupont Science & Technology Awards are awarded to scientists of universities or state-run institutes who have made outstanding R&D achievements in the fields of Chemistry, Chemical Engineering, Material Science and Material Engineering within five years. Dupont Korea announced on May 2, 2007 that Professor Yang is the recipient of the award this year, following the strict examination by the Koran Academy of Science and Technology (KAST). The reason for the award is Professor Yang’s development of prototype optical?bio-functional photonic crystal structures that can process a huge amount of data, resulting from a study that has discovered the principle of Self-assembly where multifunctional nanoparticles are manufactured and assembled for themselves. Professor Yang’s recent research result about photon structures and nano patterns was published by Nature (February 2, 2006 edition); posted on Heart-Cut, the portal site of the American Chemistry Society (ACS), as highlight paper two times (November 4, 2002 and May 1, 2006); and introduced at Research/Researcher of MRS Bulletin by the U.S. Material Research Society (MRS) as main paper in December 2003. Professor Yang is very famous in Korea and abroad for the excellences of his research achievements and has made request seminars at Harvard University, University of Wisconsin, Caltech, University of California, etc. He is also invited speaker and session organizer of the MRS and the SPIE.
2007.05.08 View 17078
A doctorate of Mechanical Engineering Named Recipient of Best Student Paper Award at International Society Seung-Min Ryu, a doctorate of Mechanical Engineering under the supervision of Professor Dong-Yul Yang, has been named as a recipient of the best student paper award of the Society for Information Display (SID). The title of the paper is ‘the study on the fabrication of super-high resolution cathode separators by X-ray lithography processes’. He proposed at this paper the fabrication of 12 micron-thick cathode separators, which can fabricate further delicate separators than the current 50 micron-thick commercial PDP separators, thereby significantly improving the resolution of PDPs in the future. Ryu will make an oral presentation on this paper and win the award at the SID conference, which will take place in the U.S. for six days from May 20.
2007.04.23 View 14278
President Nam-Pyo Suh Receives Lifetime Achievement Award from SPE President Nam-Pyo Suh has been selected as a recipient of the Lifetime Achievement Award by the Society of Plastic Engineers (SPE). The SPE is the largest professional organization that promotes polymer-related R&D. The SPE announced that it recognizes President Suh’s many contributions to the field of polymer processing. President Suh established the first university/industry cooperative research program at MIT known as the MIT-Industry Polymer Processing Program, which became a model in establishing similar programs at many other universities by NSF. Among the many new materials, products and manufacturing processes invented by him are: Microcellular plastics, known as MuCell and used commercially worldwide, USM high pressure foam molding technology, electrostatic charge-decay NDE technique for polymeric materials, and foam/straight plastic lamination process (a major industrial product).
2007.04.12 View 13050
Best Academic Award to Prof. Huen Lee Professor Huen Lee, Department of Chemical and Biomolecular Engineering, received the Best Prize of KAIST Academic Awards at the 36th anniversary ceremony of KAIST. Professor Lee has published 43 international papers and 12 domestic papers for the past five years and achieved world’s distinguished academic performances such as the development of hydrogen storage technologies, the discovery of the principle on carbon dioxide-methane hydrate swapping, etc. Professor Lee published his paper on methane hydrate at Science in 2003, and Nature introduced his paper on hydrate storage technologies as ‘highlight research’ in 2005, commenting his research as a landmark performance to pave ways for the development of future hydrogen energy. His discovery on ‘the principle of carbon dioxide-methane hydrate swapping’, published by PNAS in 2006, also gained huge attraction across the world as one of the promising technologies that can solve energy problem and global warming crisis simultaneously. Meanwhile, the rest of the awardees of 2007 are as follows: - Academic Award: Professor Jongkyeong Chung, Dep. of Biological SciencesAssociate professor Changok Lee, Dep. of MathematicsAssociate professor Sangkyu Kim, Dep. of ChemistryProfessor Dae-gab Gweon, Dep. of Mechanical Engineering - Creative Lecture Award: Associate professor Jaehung Han, Dep. of Aerospace Engineering - Excellent Lecture Award: Assistant profess Bong Gwan Jun, School of Humanities & Social Science Professor Joonho Choe, Dep. of Biological Sciences Professor Changwon Kang, Dep. of Biological Sciences Professor Seunghyup Yoo, Div. of Electrical Engineering Associate professor Otfried Cheong, Div. of Computer Science Professor Hoe Kyung Lee, Graduate School of Finance - Contribution Award: Professor Sung Chul Shin, Dep. of Physics Professor Bowon Kim, Graduate School of Culture Technology Professor Jisoo Kim, Graduate School of Finance - International Cooperation Best Award: Professor Hyung Suck Cho, Dep. of Mechanical Engineering - International Cooperation Award: Professor Kunpyo Lee, Dep. of Industrial Design Professor Soon Hyung Hong, Dep. of Materials Science & Engineering Professor Sungjoo Park, Graduate School of Culture Technology
2007.03.19 View 17319
Professor Seong-Ihl Woo Develops New High-Speed Research Method Professor Seong-Ihl Woo Develops New High-Speed Research Method Reduce research periods and expenses for thin film materials several ten times Posted on the online version of Proceedings of National Academy of Sciences of the United States of America (PNAS) on January 9 A team led by Seong-Ihl Woo, a professor of KAIST Department of Chemical & Biomolecular Engineering and the director of the Center for Ultramicrochemical Process Systems, has developed a high-speed research method that can maximize research performances and posted the relevant contents on the online version of Proceedings of National Academy of Sciences of the United States of America (PNAS), a distinguished scientific journal, on January 9, 2007. Professor Woo’s team has developed a high-speed research method that can fabricate several tens or several thousands of thin films with different compositions (mixing ratio) at the same time and carry out structural analysis and performance evaluation more than ten times faster and accurately, which leads to the shortening of the research processes of thin film materials. This is an epoch-making method that can reduce research periods and expenses several ten times or more, compared to the previous methods. The qualities of final products of electronic materials, displays, and semi-conductors depend on the features of thin film materials. Averagely, it takes about two weeks or longer to fabricate a functional thin film and analyze and evaluate its performances. In order to fabricate thin film materials in need successfully, more than several thousand times of tests are required. The existing thin film-fabricating equipment is expensive one demanding high-degree vacuum, such as chemical vapor deposition, sputtering, physical vapor deposition, laser evaporation, and so on. In order to fabricate thin films of various compositions with this equipment, a several million won-worth target (solid-state raw material) and precursors (volatile organic metal compound) pricing several hundreds won per gram are required. Therefore, huge amount of experiment expense is demanded for fabrication of several ten thousands of thin films with various compositions. Professor Woo’s team has developed ‘combinatorial droplet chemical deposition’ equipment, which does not demand high-degree vacuum and is automated by computers and robots, by using a new high-speed research measure. The equipment is priced at about 1/5 of the existing equipment and easy for maintenance. This equipment uses cheap reagents, instead of expensive raw materials. Reagents necessary to form required compositions are dissolved in water or proper solvents, and then applied by high frequencies to make several micrometer-scaled droplets (fine liquid droplet). Theses droplets are moved by nitrogen and dropped onto a substrate, which is to be fabricated into a thin film, and then subsequent thermal treatment is applied to the substrate to fabricate a thin film of required composition. At this moment, several tens or several hundreds of thin films with various compositions can be fabricated at the same time by reducing the size of thin film specimens into millimeter scale with the use of shade mask and adjusting vaporization time with masks, the moving speed of which can be adjusted. The expenses for materials necessary for the fabrication of thin films with this equipment amount to several ten thousands won per 100 grams, which is in the range of 1/100 and 1/10 of the previous methods, and the research period can be shortened into one of several tenth. “If this new method is applied to the development of elements in the fields of core energy, material and health, which have not been discovered by the existing research methods so far, as well as researches in thin film material field, substantial effects will be brought,” said Professor Woo. ‘Combinatorial droplet chemical vaporization’ equipment is pending a domestic patent application and international patent applications at Japan and Germany. This equipment will be produced by order and provided to general researchers.
2007.02.02 View 15672
Yoonsun Doh Wins 'Outstanding Poster Paper Award' at IDW Yoonsun Doh Wins ‘Outstanding Poster Paper Award’ at IDW Yoonsun Doh, a master-course student at the Division of Electrical Engineering (Advisory professor Kyungchul Choi) won the Outstanding Poster Paper Award at IDW 2006, which was held at Otsu, Japan on December 8, 2006. The title of Doh’s paper is ‘Relationship between IR Emission of Reset Discharge and Image Retention in AC PDP’. At the paper, Doh proposed a method capable of quantitatively measuring the temporary image-sticking phenomena, which is raised as a problem that impairs the quality of images on an AC PDP.
2006.12.26 View 13145
KAIST and Hynix Semiconductor Jointly Foster Manpower KAIST and Hynix Semiconductor Jointly Foster Manpower - Joint running of industry-academy programs for excellent semiconductor manpower training - Regular mutual manpower exchange for on-site education and research KAIST Department of Raw Material Science and Engineering and Hynix Semiconductor concluded an agreement to manage a ‘joint industry-academy business group’, Wednesday, December 6. The both bodies reached an agreement to jointly promote the first step of ‘the excellent semiconductor manpower training program’ for 4 years beginning 2007. KAIST plans to foster creative and excellent semiconductor manpower possessing both of theories and technologies through research topics and lectures that reflect Hynix Semiconductor’s necessities, and will promote regular manpower exchanges with Hynix Semiconductor to enhance trainees’ on-site adaptabilities. Hynix Semiconductor will actively participate in the researches and support the expenses for research and education and high-cost equipment. Furthermore, Hynix Semiconductors will dispatch its researchers to KAIST as adjunct professors to educate doctorate students, who join the researches, and assist on-site education.
2006.12.11 View 12967
Final competition of 'UFC' contest Final competition of ‘UFC’ contest Joint university team D-M2 won first prize The final winner of ‘the 2nd Ubiquitous Fashionable Computer (UFC) contest‘, co-hosted by KAIST and the Korean Society for Next-Generation Computing (KSNGC), was determined. At the final competition of November 17 among 9 qualified teams, the first prize went to D-M2, composed of students from Seokyeong University, Kookmin University, Hongik University, and Sungshin Women’s University. D-M2 manufactured a work utilizing a user’s motion information by applying motion capture technologies to UFC. Particularly, the work gained a high score at the item of the functional perfection by controlling the robot according to a user’s motion. The gold prize went to the smart jacket by Jjik-eo-cha-ki (Kwangwoon University and Duksung Women’s University). The smart jacket is embedded with an intelligent clothes function in terms of checking a user’s status in a real-time basis and delivering it to a doctor, etc. The silver and bronze prizes went to Samsung Software Membership (SSM) and Hanse University, respectively. SSM manufactured a training suit with sensors for grasping the movement of each articulation of a user built-in, and Hanse University developed a system enabling blinders to get a voice service of general documents or books regardless of time and place. The participants composed of university students or graduate students have passed the severe qualifying contest through the examination of written plan and presentation of last April and manufactured creative works that realize the fusion of IT technologies and fashion. At the contest, that fact that all winners of the first, gold, and silver prizes were the members of SSM gained more attention. UFC is a new field that pursuits the enhancement of computer technologies and the creation of fashion simultaneously by fusing IT technologies and fashions. UFC is a one-step advanced field of the existing wearable computer and an important cutting-edge field that leads a computer industry in the era of ubiquitous. “The level of the works exhibited was higher than I’d expected and the cooperation between the departments of Closing Textile and Electronics appeared to be so positive, which made me expect more brilliant future of the next-generation computing industry,” said Hoijoon You, Co-chairman of the contest and professor of the department of Electrical Engineering.
2006.11.27 View 15287
KAIST Chong-Moon Lee Library Opens KAIST Chong-Moon Lee Library Opens Jong-Moon Lee Library, management education library for scientists possessing the biggest amount of entrepreneurship data in Asia, opens in KAIST (President Nam-Pyo Suh) on Thursday, November 9, 2006. Jong-Moon Lee Library was planned when Jong-Moon Lee, Chairman of AmBex, donated 2 million dollar to KAIST and founded Entrepreneurship Research Center at KAIST in 2004. Chairman Lee emphasized on the necessity of management education for scientists of advanced technology-based venture companies and set the management plan for Jong-Moon Lee Library securing the biggest amount of Entrepreneurship data in Asia. Jong-Moon Lee Library possesses books for inspiring entrepreneurship, including ▲ books regarding how to prepare and evaluate business plans that support the realization of business ideas such as venture company founding, etc. ▲ administrative books necessary for company management such as leadership and finance, accounting, etc. ▲ economic books that foster reader’s insight over economy and society. The number of books is about 4,900 and various journals including Harvard Business Review are also provided. KAIST Entrepreneurship Research Center (President Tae-Yong Yang) is now carrying out ▲ the management of entrepreneurship library for Engineering students and businessmen ▲ programs for entrepreneurship education and venture-company founding ▲aid for business plan forums and academic conferences. It benchmarks Stanford Technology Venture Program (STVP) of Stanford University, which is evaluated the most excellent program in researches and realization of entrepreneurship, and manages education programs for scientific manpower with international managing minds on the basis of world’s best capabilities in scientific researches and education of KAIST. President Yang explained about the management plan by saying, “Following Chairman Jong-Moon Lee’s intention, the center will educate entrepreneurship to engineering students and properly diagnose initial values of excellent technologies, thereby making venture companies flourish.”
2006.11.16 View 14579
Professor Sang-Yup Lee publishes a requested paper in Nature Biotechnology Professor Sang-Yup Lee publishes a requested paper in Nature Biotechnology “The era of commercialized bioplastic is coming” Disclose an opinion as specialist at a requested paper in Nature Biotechnology, October 2006 A team led by Barbel Friedrich, Professor of Humboldt-Universitat zu Berlin, and Alexander Steinbuchel, Professor of West falische Wilhelms-Universitat Munster, found out the entire genome sequence of the typical bioplastic-producing microorganism ‘Ralstonia eutropha’ and published a paper on it in Nature Biotechnology, October 2006. As the entire genome sequence of the typical bioplactic-producing microorganism has been discovered, it is expected that the efficient production of bioplastic will be available through strain improvement at a more systematic level. Regarding this paper, Nature Biotechnology requested world-renowned scholar Sang-Yup Lee, LG Chemical Chair-Professor of KAIST Chemical and Biomolecular Engineering Department, an expert analysis on the future of bioplastic production as a result of the deciphering of the genome sequence, and Professor Lee revealed his opinion at ‘News and Views’ in Nature Biotechnology, October 2006, issued on October 10. In the analysis, he insisted, “The deciphering of the genomes of Ralstonia means to pave the way for the improvement of strains at a system level by combining simulation through various omics and imaginary cells and engineering at a genome level. It will be possible to produce plastic with desired properties by altering the components of plastic as desired and produce bioplastic, more efficient and economical than have been reported so far, through the optimization of metabolic flow.” Professor Lee is a world-renowned scholar in the bioplastic field, who has presented about 70 SCI papers in the field. He created a word ‘Plastic Bacteria’ at Trends in Biotechnology in 1996 and published an expert paper regarding E.Coli Plastic at Nature Biotechnology in 1997. He is now performing a research concerning the improvement of bioplastic-producing strains as an example of a research employing a systematic method for the system biological research and development project of the Ministry of Science and Technology. The followings are the contents of Professor Lee’s paper concerning microorganism plastic published at ‘News and Views’ in Nature Biotechnology, October 2006. - Polyhydroxyalkanoate (PHA) is a high molecule that numerous microorganisms accumulate in their own cells as energy storage substance when they are rich in carbonic resources, but poor in the other growth factors. The PHA high molecule is polyester, in which the unit substances (unit chemicals) are ester-bonded, and has been studied worldwide about twenty years before. However, PHA’s worse properties than petrochemical plastic and extremely high production cost have prevented its commercialization. The production cost of PHA was 15 dollars per kg in 1980’s, twenty times higher than the price of polypropylene. Sang-Yup Lee, LG Chemical Chair-Professor of KAIST Chemical & Biomolecular Department’s BK21 Project Group, has performed a research concerning the efficient production of microorganism plastic through the combination of metabolic engineering and fermentation process under the support of the Ministry of Science and Technology, and developed a process that lowers the production cost of PHA to 2-3 dollars per kg. He also has developed PHA-producing bacteria, efficient enough to fill plastic tightly, and named it ‘Plastic Bacteria’. - The unprecedented rise of oil price for the past two years activated the researches on Bio-based energies and chemical production globally. PHA is also regaining attentions although the researches on it have been withered so far due to its poor economical efficiency and properties. The result of the genome deciphering of the typical plastic-producing microorganism ‘Ralstonia eutropha’ published by a German research team in Nature Biotechnology, October 2006 suggests huge meanings. That is, it will provide a blueprint over the metabolic activities of the bacteria and thus enables more systematic strain improvement. - Eyeing on these facts, Nature Biotechnology requested Professor Sang-Yup Lee an expert analysis, and Professor Lee analyzed that there would be a dramatic development of microorganism plastic production through the application of the system biological engineering method, which is now being performed actively by Professor Lee at KAIST. In the analysis, Professor Lee revealed, “As the genome sequence has been found out, it becomes possible to establish metabolic network at a genome level, and since simulation becomes available, numberless trial and errors and experiments can be replaced with imaginary experiments rapidly. In addition, It makes the more efficient development of strains possible by fusion-analyzing the omics result such as various transcripts, proteins, metabolites, etc.” He also expected that it would be possible to produce tailor-made PHA having desired properties through metabolic engineering as well as the efficient production of plastic. Besides, he prospected that his research on the production of optically pure hydroxyl carboxyl acid, Professor Lee’s international patent right, would gain driving forces and technical development would be made rapidly at biological hydrogen production, production, dissolution and application of aromatic compounds, etc. by featuring this strain. - Recently, Metabolic and ADM, U.S. companies, jointly started to produce PHA at a commercialization level, and Brazil having rich natural resources is commercializing PHA, following Bio-ethanol. In addition, Japan and Germany having a bunch of research performance in this field, and Australia having rich biomass are also performing consistent researches on PHA’s commercialization. Professor Lee prospected, “With the finding out of the genome sequence of the typical bioplastic-producing microorganism, competition for commercialization will be fiercer among nations through the development of efficient production systems.” - Professor Lee prospected that as the efficient production of PHA becomes possible, the production of plastic from various renewable ingredients (cellurose, starch, suger, etc.) through microorganism fermentation would be made practically and the white biotechnologies of existing chemicals would gain more power. He also said, “Korea also will have to try to secure the production technologies and industry of Bio-based chemicals through strategic cooperation with resource powerfuls, etc. on the basis of the technical dominancy in some system metabolic engineering fields.” - ‘News and Views’ in Nature Biotechnology is a section that publishes analyses of world-renowned specialists in the corresponding fields over the contents of some papers having great influences among papers published in the issue. KAIST Professor Sang-Yup Lee has published his second expert analysis of ‘Deciphering bioplastic production’ in the volume of October 2006, following the first paper ‘Going into the era of E.Coli plastic’.
2006.10.23 View 14991
Bently Pressurized Bearing Company donates 1 million dollars to KAIST to establish a new chair professorship KAIST has announced that it recently received an endowment of 1 million US dollars from an American company, Bently Pressurized Bearing Co., earmarked to establish a chair professorship, and appointed Professor Jong Hyun Kim of Nuclear and Quantum Engineering Department as Donald E. Bently and Agnes Muszynska Endowed Chair Professor. Professor Kim is a world-renowned expert in thermal and fluids sciences applied to energy systems and an authority on their applications to rotating machinery and nuclear safety analysis. He did his research in these areas at EPRI, GE, Brookhaven National Laboratory, and Penn State University. He is a Fellow of American Society of Mechanical Engineers (ASME) and of American Nuclear Society, and is currently Editor-in-Chief of International Journal of Transport Phenomena. Bently Pressurized Bearing Co. (BPB) is pioneering fully lubricated, pressurized bearing to improve energy efficiency in rotating machinery. Mr. Donald E. Bently, Chairman and CEO of BPB, is an international authority on vibration monitoring and diagnostics of rotating machinery, published widely on these topics and holds patents. A philanthropist deeply interested in technology and science education, Mr. Bently made generous donations to a number of universities. He received numerous honors and awards, including those from ASME, the Pacific Center of Thermal-Fluids Engineering, University of Iowa, and received Nevada’s Outstanding Inventor Award. He was conferred an Honorary Doctorate Degree by the University of Nevada and is a Fellow of ASME. Dr. Agnes Muszynska is a world-renowned scientist in the area of rotating machinery dynamics in which she published 300 papers and a book. She was in responsible charge of research and development at Bently’s companies for many years. She was conferred the prestigious national title of Professor granted by the President of Poland. Dr. Muszynska is a Fellow of ASME. Professor Kim said, “I am pleased that KAIST received this endowment, which can be interpreted as an international recognition for the research standard of KAIST. The chair named after the two prominent engineers means a lot to me, as they are familiar with my research activities. I feel particularly honored because the endowment came from overseas.” KAIST has raised its eyesight to become a global leader in technology and science and recently lured a Nobel Laureate from Stanford University, Dr. Robert Laughlin, to head the institute. The school is striving to accelerate the pace for globalizing itself. The establishment of this chair professorship through a foreign endowment is in concert with the KAIST’s grand vision. Resume for Jong Hyun Kim, Ph.D. Donald E. Bently and Agnes Muszynska Endowed Chair Professor Education 1966 BS in Mechanical Engineering, Seoul National University 1967 MS in Mechanical Engineering, University of Missouri 1971 Ph.D. in Mechanical Engineering, Californian Institute of Technology Professional Career 2002 - present Professor, Dept. of Nuclear and Quantum Engineering, KAIST 2001 - 2002 Distinguished Chair Professor, Dept. of Mechanical & Aerospace Engineering, GyeongSang National University 1980 - 2000 Project Manager, EPRI 1977 - 1980 Senior Engineer, GE 1975 - 1977 Associate Engineer, Brookhaven National Laboratory 1973 - 1975 Research Associate, Applied Research Laboratory, Penn State University 1971 - 1973 Research Fellow, California Institute of Technology Achievements/Recognitions Fellow, American Nuclear Society Fellow, American Society of Mechanical Engineers National Academy of Engineering of Korea: overseas Korean member Research: - Total 185 publications: 117 papers, 11 books, 16 symposia volumes, and others - Professor Kim’s research products helped nuclear industry save a few hundred million dollars Editor-in-Chief, International Journal of Transport Phenomena Chairman, Thermal Hydraulics Division, American Nuclear Society (2002-2003) Chairman, Heat Transfer Division. American Society of Mechanical Engineers (2001-2002) UC Berkeley, Adjunct Professor in Mechanical Engineering (1993-1995)Stanford University, Consulting Professor in Mechanical Engineering (1988-1995) About Donald E. Bently and Agnes Muszynska Donald E. Bently, Chairman & CEO of Bently Pressurized Bearing Company, Minden, Nevada, is an engineer, inventor, entrepreneur, agriculturist, environmental conservationist, and visionary who is also a philanthropist. Entrepreneurial Accomplishments Founder, Chairman, and CEO of Bently Nevada Corp., the world"s leading supplier of condition monitoring instrumentation and services for rotating machinery until it was sold to GE in 2002 Founder of Bently Rotor Dynamics Research Corporation, a wholly owned subsidiary of Bently Nevada, where the basic ideas for his bearing technology were pioneered Pioneered the first commercially successful eddy current proximity transducer and introduced its use to measure vibration and other critical parameters in rotating machinery. Today, he is actively pioneering fully lubricated, pressurized bearing technology. His Bently Agrowdynamics practices environmentally sustainable agriculture through the innovative use of renewable resources and conducts research and development of biofuels such as biodiesel, which can be used in conventional diesel engines. In addition, Donald E. Bently owns a diverse portfolio of other businesses including National Tribology Services, Inc., Gibson Tool & Supply, and Bently Holdings California, LP. Scientific and Technological Contributions Mr. Bently is an international authority on rotor dynamics as well as vibration monitoring and diagnostics. He has authored or co-authored more than 140 papers and a book on these subjects, Fundamentals of Rotating Machinery Diagnostics, and is the holder of two patents. Honors and Awards 2003: Distinguished Service Award, California Polytechnic State University, San Luis Obispo. 2002: Distinguished Nevadan Award, the University of Nevada, Reno. Fellow, American Society of Mechanical Engineers (ASME) 2001: Inducted into the University of Iowa"s Distinguished Engineering Alumni Academy 2000: Frederick P. Smarro Award, American Society of Mechanical Engineers 1999: R. Tom Sawyer Award, American Society of Mechanical Engineers 1997: N.O. Myklestad Award, ASME Design Engineering Division 1995: ISROMAC Award for his distinguished research achievements in the field of rotating machinery, the Pacific Center of Thermal-Fluids Engineering 1992: Elected a Foreign Member of the St. Petersburg Academy of Engineering in Russia Visiting Scholar, Tsinghua University, China The first recipient of the Vibration Institute"s DECADE Award 1983: Nevada"s outstanding inventor award, the Nevada Innovation and Technology Council 1945-1946: Received four battle stars while on an amphibious landing team in the Pacific as a member of the U.S. Navy Seabees during World War II Educational and Professional Credentials Registered Professional Engineer in Electrical Engineering, Nevada and California A senior member of IEEE and a Fellow of ASME A member of honorary societies Sigma Xi, Eta Kappa Nu, and Tau Beta Pi B.S. in Electrical Engineering (with Distinction), University of Iowa, 1949 M.S. in Electrical Engineering, University of Iowa, 1950 Honorary Doctorate in Engineering, University of Nevada at Reno, 1987 Honorary AA Degree, Western Nevada Community College, 1998 Agnes Muszynska, President, A.M. Consulting Co. Dr. Agnes Muszynska, a native of Poland, is a world-renowned scientist in the area of rotating machinery dynamics. She worked for 18 years as a Senior Research Scientist and Research Manager at Bently Nevada Corporation and Bently Rotor Dynamics Research Corporation. For more than 40 years, Dr. Muszynska had conducted theoretical and experimental research on rotating machine dynamics. Dr. Muszynska received B.S. and M.S. degrees in Mechanical Engineering from Technical University of Warsaw, Poland. She received her Ph.D. from Polish Academy of Sciences and the prestigious title of Professor granted by the President of Poland. She is author or co-author of almost 300 scientific publications including a comprehensive book on rotordynamics. Several of her papers received awards from ASME, NASA, and ASEM. She also received the Distinguished Research Award for research achievements from the Pacific Center of Thermal-Fluids Engineering. Dr. Muszynska is currently the owner and President of A.M. Consulting Company. She is a Fellow of American Society of Mechanical Engineers. Mr. Donald Bently and Dr. Agnes Muszynska fruitfully collaborated on rotating machinery dynamics and diagnostics for many years.
2004.11.08 View 18822
Professor Kim Donates W5 Bil. to KAIST Korea Times 2004.5.21 By Kim Tae-gyu / Staff Reporter A professor from the Korea Advanced Institute of Science and Technology (KAIST) has donated his inherited wealth of 5 billion won to the state-owned institute. The KAIST announced professor Kim Dong-won contributed 5 billion won in properties and cash, which he inherited from his father, who passed away late last year. ``Professor Kim has asked us to spend the contribution in the development of Korea’s science in accordance with the late Kim’s will,’’ said Park Jae-wook, a KAIST spokesman. Park added Kim had tried to remain anonymous, but his identity was revealed by some local newspapers. Kim is currently in the United States as he is out of his post on an interim basis and will come back to Korea in August. Four billion won of the donation will be used to set up scholarships, which will endow 20 million won each to 10 KAIST students every year. The remaining 1 billion won will help invite illustrious scholars to the institute. Adding to the good news for KAIST, Lee Chong-moon, chairman of the U.S.-based venture company Ambex, has also donated 2 billion won. The 76-year-old Lee called for the KAIST to inspire a sprit among students by establishing a management center named after him.
2004.05.21 View 15835

KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea T.042-350-2114 F.042-350-2210(2220)