-
Liver Damage Mechanism of Hepatitis C Proven
KAIST researchers found mechanics behind a Hepatitis C virus, thereby taking a step closer to the development of a cure for Hepatitis C.
Professor Choi Chul Hui (Department of Biological and Brain Engineering) and Professor Shin Eui Chul (Graduate School of Medical Sciences) proved, for the first time in the world, the mechanism behind liver damage of a patient with Hepatitis C.
It is anticipated that this discovery will allow for the development of a Hepatitis C cure that has no side effects and little Liver damage.
Hepatitis C is an immune response of the body to the Hepatitis C virus and causes liver irritation.
Around 170million people are infected with Hepatitis C worldwide including 1% of the Korean population. Once infected, most cases turn into chronic cases and may lead to liver cancer.
However it was impossible to infect Hepatitis C within a test tube cell environment until 2005 and up till then Chimpanzees were used to study the virus which proved to be a huge barrier to research.
The research team used cells infected with Hepatitis C virus and found out that the virus works by increasing the destruction of cells by the TNF-a protein responsible for the cell’s immune response.
In addition the protein structure of the virus that causes this reaction was successfully found.
Conventionally the Hepatitis C medication focused on the suppressing the growth of the virus and therefore had many side effects.
The experimental results allow new medication aimed at suppressing the actual mechanism of liver damage to be discovered.
The result was selected as the cover dissertation of the September Edition of the Hepatolog magazine.
2012.09.11 View 11442 -
Jellyfish removal robot developed
Professor Myung Hyun’s research team from the Department of Civil and Environmental Engineering at KAIST has developed a jellyfish removal robot named ‘JEROS’ (JEROS: Jellyfish Elimination RObotic Swarm).
With jellyfish attacks around the south-west coast of Korea becoming a serious problem, causing deaths and operational losses (around 3 billion won a year), Professor Myung’s team started the development of this unmanned automatic jellyfish removal system 3 years ago.
JEROS floats on the surface of the water using two long cylindrical bodies. Motors are attached to the bodies such that the robot can move back and forth as well as rotate on water. A camera and GPS system allows the JEROS to detect jellyfish swarm as well as plan and calculate its work path relative to its position.
The jellyfish are removed by a submerged net that sucks them up using the velocity created by the unmanned sailing. Once caught, the jellyfish are pulverized using a special propeller.
JEROS is estimated to be 3 times more economical than manual removal. Upon experimentation, it showed a removal rate of 400kg per hour at 6 knots. To reach similar effectiveness as manual net removal, which removes up to 1 ton per hour, the research team designed the robot such that 3 or more individual robots could be grouped together and controlled as one.
The research team has finished conducting removal tests in Gunsan and Masan and plan to commercialize the robot next April after improving the removal technology. JEROS technology can also be used for a wide range of purposes such as patrolling and guarding, preventing oil spills or removing floating waste. This research was funded by the Ministry of Education, Science and Technology since 2010.
2012.08.29 View 11139
-
First Annual CanSat Idea Exhibition held
The Ministry of Education, Science, and Technology held the ‘CanSat’ Exhibition in order to increase interest and understanding of satellites in primary, secondary, and high school level students.
The exhibition, hosted by KAIST Satellite Research Center and funded by Korea Aerospace Institute, was held in SaeJeong City.
90 primary, secondary school teams, 57 high school teams, and 14 university teams submitted their applications for participation. Of these teams 20 primary, secondary school teams, 5 high school teams, and 5 university teams were selected after thorough document valuation and presentation assessment.
The 20 primary, secondary school teams participated in the science camp to gain firsthand experience in the construction and launch of a simple satellite system.
The high school and university teams were evaluated by the level of completion of the task given and the level of creativity involved.
The CanSat Exhibition has been held in aerospace powerhouses and this was the first time such an exhibition was held in Korea.
2012.08.21 View 8212
-
Hosting of Third Annual 2012 Social Web International Workshop
KAIST Department of WebScience Engineering hosted the 2012 Social Web International Workshop in JaeJu Ramada Hotel.
The 3rd Annual International Workshop involves the coming together of domestic and international experts on various fields like sociology, journalism, electronics, economics, and etc. to introduce and discuss the direction of social web’s numerous factions.
Dr. Krishna Gummadi (Max Plank Research Institute), Professor Irwin King (Chinese University of Hong Kong), Dr. Winter Mason (Stevens Technology Research Institute), and Professor Daniele Quercia (Cambridge University) made up the international participants of the workshop.
Professor Kim Yong Chan (Yonsei University), Professor Kim Ye Ran (KwangWoon University), Professor Park Ju Yong (Kyung Hee University), Professor Oh Hae Yeon and Professor Lee Won Jae (KAIST) made up the domestic participants to the workshop.
The workshop was a place for free discussion of social networks and apps and the research direction of social sciences.
2012.08.21 View 7207
-
Successful development and analysis of mesoporous quasicrystal structures
Professor Osamu Terasaki’s research team from the EEWS Graduate School at KAIST successfully synthesized mesoporous quasicrystalline silica and developed a new method of analyzing its growth. The theory proposed by the team laid the foundation for the scientific examination of quasicrystal phenomena during the formation of micelles particles, a type of soft matter. The paper was published in the July edition of Nature magazine.
Scientists have faced difficulty in systematically explaining the mesoporous quasicrystal structures that are found in solidified versions of soft matter systems. However, the theoretical foundation from this research is expected to help promote the research and development of new nano-structured materials.
Mesoporous quaicrystals are soft matters that have high symmetry and a larger characteristic length scale than the nanoscale, thereby making it possible to develop materials that have controllable optical properties. This technology can be applied to the sustainable storage, use, and reproduction of energy.
Professor Terasaki’s team succeeded in synthesizing mesoporous quasicrystalline silica and proved the formation of dodecagonal column-shaped crystals as well as dodecagonal, rotationally symmetric electron diffraction patterns near the crystals using Transmission Electron Microscopy.
Quasicrystals are an abbreviation of ‘quasiperiodic crystals’ and have what is called the ‘third solid’ property; they have a structural arrangement that is between arranged crystal structures, such as metals, and non-crystalline structures, such as glass. This crystalline structure was only recently found, and the 2011 Nobel Chemistry Award was given to research in this field.
When porous materials are synthesized into quasicrystals, the crystalline structures of the pores can be designed and controlled in any way, making it possible to create new materials for a wide range of fields.
Professor Terasaki said that ‘The discovery of highly symmetric quasicrystals can lead to the alteration of a material’s optical properties, allowing the development of photonic crystals in the visible spectra.’ He also explained that this control of a material’s optical energy absorption could be the core technology behind energy harvesting.
This research was jointly conducted by Professor Terasaki from the EEWS Graduate School at KAIST and Stockholm University in Sweden.
2012.08.01 View 8450
-
Ultra Elastic Electrode Material Developed
KAIST research team succeeded in developing the next generation flexible and elastic electrode material crucial in the development of flexible displays, wearable computers, and etc.
Professor Jeon Seok Woo’s team of the department of Materials Science and Engineering succeeded in the development of a super elastic material.
The result of the experiment was introduced as the research highlight in Nature Communications and is especially significant as the main driving force behind the achievement were domestic researchers.
Professor Jeons team developed a structured three dimensional nano-porous structure over a 1inch by 1inch area that is 10micrometers in thickness. The structure is fabricated using world’s largest area three dimensional nano patterning technique.
The nano-porous structure was injected with elastomeric material and was subsequently removed to yield an inverse three dimensional elastic nano material. The pores were infiltrated with liquid conductive material which yielded a super elastic flexible electrode.
The fabricated electrode showed amazing elasticity levels and was able to light LED lamps in a 200% stretched state without decrease in electrical conductivity.
Conventional methods included folding and expanding a material like an accordion or creating a mesh-like structure by making holes in the material. However these methods yielded materials with limited elasticity and even 100% stretching resulted in the drastic decrease in electrical conductivity.
Professor Jeon expects the domestically developed technology to obtain the upper hand in the market and make great contributions in both science and society.
2012.07.26 View 8922
-
Commercialization of Carbon Capture and Storage Technology Speeds up
KAIST research team successfully developed the ideal method for carbon dioxide transportation, which is crucial in the capturing and underground storage of carbon dioxide technology.
Professor Jang Dae Joon of the department of Ocean Systems Engineering developed a carbon dioxide transportation that minimizes evaporative gases.
The new technology is the final piece of the three part carbon capture storage which involves capture, transportation, and storage of carbon dioxide. The completion of the three part technology will allow for commercialization in the near future.
Carbon Capture and Storage technology is regarded as the technology that will reduce carbon dioxide levels. It captures the carbon dioxide emitted from power plants and factories and storing them permanently in empty oil fields underground.
If the post Kyoto Protocol was to be implemented from 2013, Korea will not be able to shirk from the need to reduce carbon emissions. Therefore the Korean government set out to reduce 32 million tons of carbon dioxide (10% of predicted carbon reduction) until 2030. In response to the government’s efforts to reduce carbon dioxide emissions, Korean research teams like KAIST have responded.
Professor Jang’s team succeeded in developing the core technology for underground storage in the 2009 ‘Carbon dioxide Transport and Injection Terminal Project’. And as the final piece of the puzzle the team developed an optimization solution that addressed the evaporating gases emitted from carbon dioxide during transportation.
Professor Jang’s team focused on the required low temperature and high pressure conditions in liquid carbon dioxide transport.
The problem lies in the temperature gradient which can cause the transport canister to explode.
The solution developed by the team is to evaporate carbon dioxide in a pressurized contained which is then re-liquidated.
External variables like price of oil, carbon taxation, etc. have been considered and the process was optimized accordingly.
The result of Professor Jang’s team’s solution to Carbon Capture and Storage was stored in the online edition of International Journal of Greenhouse Gas Control.
2012.07.26 View 8869
-
Professor Bae Sang Min Wins Multiple Prestigious Design Awards
Summer is perfect for many outdoor activities, but it is also the season for mosquitoes, an annoying pest that makes outdoor experiences unpleasant and sometimes even dangerous. An easy-to-use and environmentally-friendly spray, “Sound Spray” (http://idsa.org/soundspray-self-generating-non-toxic-ultrasonic-anti-mosquito-spray), which repels mosquitoes by setting off ultrasonic waves, has been developed by a research team at KAIST. The spray produces sounds similar to those of mosquitoes’ natural predators.
Sound Spray made the list of finalists in the category of "Social Impact Design" from the 2012 International Design Excellence Awards (IDEA). The IDEA is one of the most renowned design competitions in the world, which has been held annually by the Industrial Designers Society of America (IDSA).
Inside Sound Spray is a battery that generates electricity when a user shakes the spray bottle. Electrical energy produced by the battery creates an ultrasonic sound that mosquitoes dislike, thereby discouraging their contact with human skin. Professor Sangmin Bae from the Department of Industrial Design at KAIST explains,
“In regions such as Africa or Southeast Asia, mosquitoes are still posing a big threat to public health. Unlike Freon-based, disposable insect repellents on the market, Sound Spray is eco-friendly, easy to carry around, reusable, and affordable. I plan to commercialize and distribute it to nations in Africa or Southeast Asia to help them combat against malaria, an infectious disease that patients contract through mosquito bites.”
Professor Bae also received another award from the 2012 IDEA in the area of Commercial and Industrial Products: a bronze medal for a milling machine, the Namsun Milling Machine (http://www.idsa.org/namsunnew-innovative-milling-machine-design). The machine has large windows on each side of its main body that display a transparent workflow so that users easily understand the machine’s operation status. Curved lines are actively used for the exterior design of the machine to create a more friendly work environment.
In addition to the 2012 IDEA, Professor Bae has participated in other major international design awards, including the Red Dot Award, the If Design Award Japan, and the Good Design Award, from which his research team has received a total of 41 prizes.
Professor Bae initiated a campaign in 2005 called “Philanthropy Design,” through which he has donated many of his designs to help people in need. For more on his research, please visit http://www.coroflot.com/frame29/Portfolio1.
2012.07.26 View 11442 -
Graduate School of Culture and Technology Begins Mobile Science Classroom
KAIST Graduate School of Culture and Technology plans visits to elementary schools without the facilities to facilitate hands on science education.
The Graduate School of Culture and Technology planned the ‘STEAM Creative Camp’ involving three elementary schools during the summer holidays.
The ‘STEAM Creative Camp’ involves increasing interest and artistic sensitivity through experience based science education.
The program is composed of two separate programs in consideration to the level of participating students.
The beginner level program includes: code making, writing secret letters, sticker decorating program and the moderate level program includes: making wipers using complex pulley system, catapult design using elasticity, and puppet show using joints to animate.
The programs will be taught by masters and doctorate program candidates from the KAIST Youth Culture and Technology Experience Center.
*STEAM: And integrated education system including Science, Technology, Engineering, Arts, and Mathematics.
2012.07.26 View 8240
-
KAIST researchers verify and control the mechanical properties of graphene
KAIST researchers have successfully verified and controlled the mechanical properties of graphene, a next-generation material. Professor Park Jung Yong from the EEWS Graduate School and Professor Kim Yong Hyun from the Graduate School of Nanoscience and Technology have succeeded in fluorinating a single atomic-layered graphene sample and controlling its frictional and adhesive properties. This is the first time the frictional properties of graphene have been examined at the atomic level, and the technology is expected to be applied to nano-sized robots and microscopic joints.
Graphene is often dubbed “the dream material” because of its ability to conduct high amounts of electricity even when bent, making it the next-generation substitute for silicon semiconductors, paving the way for flexible display and wearable computer technologies. Graphene also has high potential applications in mechanical engineering because of its great material strength, but its mechanical properties remained elusive until now.
Professor Park’s research team successfully produced individual graphene samples with fluorine-deficiency at the atomic level by placing the samples in Fluoro-xenon (XeF2) gas and applying heat. The surface of the graphene was scanned using a micro probe and a high vacuum atomic microscope to measure its dynamic properties.
The research team found that the fluorinated graphene sample had 6 times more friction and 0.7 times more adhesiveness than the original graphene. Electrical measurements confirmed the fluorination process, and the analysis of the findings helped setup the theory of frictional changes in graphene.
Professor Park stated that “graphene can be used for the lubrication of joints in nano-sized devices” and that this research has numerous applications such as the coating of graphene-based microdynamic devices.
This research was published in the online June edition of Nano Letters and was supported by the Ministry of Science, Technology, and Education and the National Research Foundation as part of the World Class University (WCU) program.
2012.07.24 View 14121 -
Systems biology demystifies the resistance mechanism of targeted cancer medication
Korean researchers have found the fundamental resistance mechanism of the MEK inhibitor, a recently highlighted chemotherapy method, laying the foundation for future research on overcoming cancer drug resistance and improving cancer survival rates. This research is meaningful because it was conducted through systems biology, a fusion of IT and biotechnology.
The research was conducted by Professor Gwang hyun Cho’s team from the Department of Biology at KAIST and was supported by the Ministry of Education, Science and Technology and the National Research Foundation of Korea.
The research was published as the cover paper for the June edition of the Journal of Molecular Cell Biology (Title: The cross regulation between ERK and PI3K signaling pathways determines the tumoricidal efficacy of MEK inhibitor).
Targeted anticancer medication targets certain molecules in the signaling pathway of the tumor cell and not only has fewer side effects than pre-existing anticancer medication, but also has high clinical efficacy. The technology also allows the creation of personalized medication and has been widely praised by scientists worldwide.
However, resistances to the targeted medication have often been found before or during the clinical stage, eventually causing the medications to fail to reach the drug development stage. Moreover, even if the drug is effective, the survival rate is low and the redevelopment rate is high.
An active pathway in most tumor cells is the ERK (Extracellular signal-regulated kinases) signaling pathway. This pathway is especially important in the development of skin cancer or thyroid cancer, which are developed by the mutation of the BRAF gene inside the path. In these cases, the MEK (Extracellular signal-regulated kinases) inhibitor is an effective treatment because it targets the pathway itself. However, the built-up resistance to the inhibitor commonly leads to the redevelopment of cancer.
Professor Cho’s research team used large scale computer simulations to analyze the fundamental resistance mechanism of the MEK inhibitor and used molecular cell biological experiments as well as bio-imaging* techniques to verify the results.
* Bio-imaging: Checking biological phenomena at the cellular and molecular levels using imagery
The research team used different mutational variables, which revealed that the use of the MEK inhibitor reduced the transmission of the ERK signal but led to the activation of another signaling pathway (the PI3K signaling pathway), reducing the effectiveness of the medication. Professor Cho’s team also found that this response originated from the complex interaction between the signaling matter as well as the feedback network structure, suggesting that the mix of the MEK inhibitor with other drugs could improve the effects of the targeted anticancer medication.
Professor Cho stated that this research was the first of its kind to examine the drug resistivity against the MEK inhibitor at the systematic dimension and showed how the effects of drugs on the signaling pathways of cells could be predicted using computer simulation. It also showed how basic research on signaling networks can be applied to clinical drug use, successfully suggesting a new research platform on overcoming resistance to targeting medication using its fundamental mechanism.
2012.07.06 View 10442
-
New wireless charging device developed
The On-line Electric Vehicle (OLEV) developed by KAIST has made a step towards commercialization with the development of a more economic wireless charging device.
Professor Chun-Taek Rim from the Department of Nuclear and Quantum Engineering at KAIST has developed a new I-shaped wireless charging device that differs from the pre-existing rail-type electricity feeder. This device can be modularly produced and requires relatively less construction, significantly reducing the cost of implementation.
The KAIST OLEV is a new concept electric car that has a special electricity collecting device underneath it. The car’s battery is charged by magnetic fields produced from electric lines buried 15cm underneath the road. The vehicle was first tested in 2009, making it the first wireless electric car in the world. OLEV can be charged during stoppage time between traffic lights and receives real-time power when running. OLEV is currently in operation at the KAIST Munji Campus in Daejeon and is also being exhibited at the Yeosu Expo and Seoul Grand Park.
The device itself has a charging capacity of 15kW, and the electricity is supplied through an electricity feeder with a width of 80cm with a space interval of 20cm. Despite being hailed as a technological breakthrough and revolutionary concept, KAIST OLEV has been criticized for problems in commercialization, due to the difficulties in installing wires beneath existing roads, which costs a considerable amount of money.
The new I-shaped wireless charging device reduces the width of the electricity feeder by 10cm, a mere one-eighth of the size of the previous version, and greatly increases the charging power to 25kW. Furthermore, the left and right permissible space of automobiles has increased to 24cm and the magnetic field complies with the international design guidelines, making the OLEV safe for the human body.
The reduction of the width has made the mass production of modules possible, making the installation of KAIST OLEV more economical and marketable. Professor Rim emphasized that compared with the existing rail-type electricity feeder, the new technology will need only one-tenth of the construction time and 80% of the cost, significantly improving OLEV’s constructability and workability.
The research was published in the IEEE Transactions on Power Electronics last December, and Professor Rim was invited to talk at the Conference on Electric Roads & Vehicles, which was held in February in the United States, about the new technology.
2012.07.06 View 10757