KAIST Uses Surface ‘Defects’ to Enhance Droplet Formation and Removal, Achieving Up to 5.5 Times the Heat Transfer Performance of Conventional Surfaces
A technology that boosts condensation heat transfer performance by up to 5.5 times that of conventional copper surfaces has been developed by helping water droplets form more readily and detach more quickly. It is expected to help improve the energy efficiency of power plants and desalination facilities and enhance the cooling performance of electronic devices.
KAIST (President Choongsik Bae) announced on August 23 that a joint research team led by Professor Youngsuk Nam from the Department of Mechanical Engineering and Professor Sung Gap Im from the Department of Chemical and Biomolecular Engineering has developed a technology that controls the thickness and structure of an ultrathin polymer coating applied to a surface, allowing more water droplets to form and the resulting droplets to detach more quickly as water vapor turns into liquid water.
Condensation is the process by which water vapor turns into liquid water. It is easy to observe in everyday life, as when droplets form on the surface of a cold beverage cup. In industrial settings, it is widely used to convert steam back into water at power plants, obtain fresh water from seawater, and remove heat generated by electronic devices.
During condensation, rapidly removing water from the surface is essential. On ordinary metal surfaces, small droplets merge to form a thin water film. This water film adds thermal resistance, impeding heat flow and reducing heat transfer efficiency, much like layers of winter clothing that slow the loss of body heat.
By contrast, when water forms as small droplets and continuously detaches, it repeatedly exposes fresh surface area. This phenomenon, in which water condenses as droplets, is known as dropwise condensation. Put simply, instead of water continuously covering the surface, droplets repeatedly form and fall away. This allows heat to be transferred more effectively.
Existing technologies, however, faced a dilemma. Roughening the surface to create more sites where droplets could first form caused the droplets to become caught on the structures and prevented them from detaching easily. Conversely, smoothing the surface helped droplets detach but reduced the number of sites available for new droplets to form. In other words, surface features that promote droplet formation can also make droplets harder to remove, creating a fundamental trade-off between nucleation and droplet mobility.
The research team solved this problem by using nanoscale polymer aggregates that had previously been regarded as ‘defects’ in polymer films. The team used initiated chemical vapor deposition (iCVD), a process that deposits gas-phase precursors onto a surface to create an ultrathin polymer film. When the polymer film was made thinner, small polymer aggregates formed densely across the surface and served as nucleation sites where water droplets could readily begin to form. As a result, approximately three times more droplets formed on the thin polymer films than on the thicker films.
The team then added a heat treatment step to reduce the force holding droplets to the surface. This allowed droplets to detach easily before growing large. In other words, thinning the polymer film increased the number of sites where droplets could form, while heat treatment helped the resulting droplets detach quickly. The key advance was to control these two competing effects separately: film thickness increased droplet nucleation, while thermal treatment promoted droplet removal.
New droplets form again where previous droplets have detached. Much like the next person taking a seat as soon as it becomes vacant, the faster droplets form and detach, the more frequently the surface is renewed, allowing heat to transfer more efficiently during condensation.
The research team coated copper tubes commonly used in actual condensers with the polymer film and evaluated their performance. The maximum condensation heat transfer coefficient, a measure of heat transfer ability, reached approximately 88 kW·m⁻²·K⁻¹. This represented heat transfer performance up to approximately 5.5 times higher than that of a conventional copper surface with a water film. The coating also performed more than 50% better than a conventional hydrophobic coating surface.
Unlike conventional approaches focused on making surfaces smooth or hydrophobic, this study actively used small surface ‘defects.’ The researchers found that nanoscale particles previously regarded as features to be eliminated could instead help droplets form, and they incorporated that finding into a new surface-design strategy.
If applied to power plants or industrial heat exchangers, the technology could help improve energy efficiency by transferring heat more effectively. It is also expected to enable more effective water collection in desalination and water-harvesting devices and faster heat removal for improved cooling of electronic devices.
Professor Nam said, “This research is meaningful because it uses nanostructures previously regarded as defects as features that help droplets form. We have presented a new method for improving heat transfer efficiency by separately controlling droplet formation and removal.” He added, “Because this technology can form extremely thin, uniform coatings even on surfaces with complex shapes, we expect it to be used in various energy and environmental applications, including industrial heat exchangers.”
Jun Soo Kim, a researcher in the Department of Mechanical Engineering, and Minjeong Kang, a researcher in the Department of Chemical and Biomolecular Engineering, co-authored the study as first authors. The results were published online in the international journal Nature Communications on July 16.
Paper title: Rational design of polymer film morphology via structure–performance linkage for enhanced condensation performance
DOI: https://doi.org/10.1038/s41467-026-75621-5
This research was supported by the Mid-Career Researcher Program (Ministry of Science and ICT and the National Research Foundation of Korea), the SME Technology Innovation Development Program (Ministry of SMEs and Startups and the Korea Technology and Information Promotion Agency for SMEs), and the Deep-Tech Startup Activation Support Program (Ministry of Science and ICT and Commercialization Promotion Agency for R&D Outcomes, COMPA).
Breakthrough in Intractable Intestinal Disease Treatment Using Xenogeneic-Free Intestinal Stem Cells
< (From left) Professor Sung Gap Im (KAIST), Dr. Seonghyeon Park (KAIST), M.S candidate Sang Yu Sun (KAIST), Dr. Mi-Young Son (KRIBB), (Top right) Dr. Tae Geol Lee (KRISS), Dr. Jin Gyeong Son (KRISS) >
Intestinal Stem Cells (ISCs) derived from a patient's own cells have garnered significant attention as a new alternative for treating intractable intestinal diseases due to their low risk of rejection. However, clinical application has been limited by safety and regulatory issues arising from conventional culture methods that rely on animal-derived components (xenogeneic components). A KAIST research team has developed an advanced culture technology that stably grows ISCs without animal components while simultaneously enhancing their migration to damaged tissues and regenerative capabilities.
KAIST announced on December 23rd that a joint research team—led by Professor Sung Gap Im from the Department of Chemical and Biomolecular Engineering, Dr. Tae Geol Lee from the Nano-Bio Measurement Group at the Korea Research Institute of Standards and Science and Dr. Mi-Young Son from the Stem Cell Convergence Research Center at the Korea Research Institute of Bioscience and Biotechnology has developed a polymer-based culture platform that dramatically improves the migration and regeneration of ISCs in a xenogeneic-free environment.
To overcome obstacles in the clinical application of stem cell therapies—such as the risk of virus transmission to patients when using substances derived from mouse fibroblasts or Matrigel—the joint research team developed "PLUS" (Polymer-coated Ultra-stable Surface). This polymer-based culture surface technology functions effectively without any animal-derived materials.
< Figure 1. Precise control of polymer coating and surface modification via initiated Chemical Vapor Deposition (iCVD) process >
PLUS is a synthetic polymer surface coated via a vapor deposition method. By precisely controlling surface energy and chemical composition, it significantly enhances the adhesion and mass-culture efficiency of ISCs. Notably, it maintains identical culture performance even after being stored at room temperature for three years, securing industrial scalability and storage convenience for stem cell therapeutics.
Through proteomics analysis*, the research team identified that the expression of proteins related to cytoskeletal reorganization significantly increased in ISCs cultured on the PLUS environment.
Proteomics Analysis: A method used to simultaneously analyze the types and quantitative changes of all proteins present within a cell or tissue.
Specifically, the team confirmed that increased expression of cytoskeleton-binding and actin-binding proteins leads to a stable restructuring of the internal cellular architecture. This provides the power source for stem cells to move faster and more actively across the substrate.
< Figure 2. Elucidation of the mechanism for enhanced ISC migration through precision proteomics analysis >
Real-time observations using holotomography microscopy revealed that ISCs cultured on PLUS exhibited a migration speed approximately twice as fast as those on conventional surfaces. Furthermore, in a damaged tissue model, the cells demonstrated outstanding regenerative performance, repairing more than half of the damage within a single week. This proves that PLUS activates the cytoskeletal activity of stem cells, thereby boosting their practical tissue regeneration capabilities.
The newly developed PLUS culture platform is evaluated as a technology that will significantly enhance the safety, mass production, and clinical feasibility of ISCs derived from human pluripotent stem cells (hPSCs). By elucidating the mechanism that simultaneously strengthens the survival, migration, and regeneration of stem cells in a xenogeneic-free environment, the team has established a foundation to fundamentally resolve safety, regulatory, and productivity issues in stem cell therapy.
Professor Sung Gap Im of KAIST stated, "This research provides a synthetic culture platform that eliminates the dependence on xenogeneic components—which has hindered the clinical application of stem cell therapies—while maximizing the migration and regenerative capacity of stem cells. It will serve as a catalyst for a paradigm shift in the field of regenerative medicine."
Dr. Seonghyeon Park (KAIST), Sang Yu Sun (KAIST), and Dr. Jin Gyeong Son (KRISS) participated as first authors. The research findings were published online on November 26th in Advanced Materials, the leading academic journal in materials science.
Paper Title: Tailored Xenogeneic-Free Polymer Surface Promotes Dynamic Migration of Intestinal Stem Cells
DOI: 10.1002/adma.202513371
This research was conducted with support from the Ministry of Science and ICT, the Ministry of SMEs and Startups, the National Research Foundation of Korea, the National Council of Science and Technology Research, KRISS, KRIBB, and the National NanoFab Center.