본문 바로가기 대메뉴 바로가기

KAIST

NEWS

홈페이지 통합검색

-
KOREAN

%52%61%64%69%61%74%69%76%65%20%54%68%65%72%6d%6f%73%74%61%74

Makes Summer Cooler and Winter Warmer Without Power <(Front row from left)Professor Young Min Song, Ph.D candidate Hyung Rae Kim, M.S candidate Hyunkyu Kwak, (Back row from left)Ph.D candidate Hyo Eun Jeong, Dr. Sehui Chang, Ph.D candidate Do Hyeon Kim, (Circle from left) Professor Dae-Hyeong Kim, Dr. Yoonsoo Shin, Dr. Se-Yeon Heo> The poplar (Populus alba) has a unique survival strategy: when exposed to hot and dry conditions, it curls its leaves to expose the ventral surface, reflecting sunlight, and at night, the moisture condensed on the leaf surface releases latent heat to prevent frost damage. Plants have evolved such intricate mechanisms in response to dynamic environmental fluctuations in diurnal and seasonal temperature cycles, light intensity, and humidity, but there have been few instances of realizing such a sophisticated thermal management system with artificial materials. Through this research, the KAIST research team has developed an artificial material that mimics the thermal management strategy of the poplar leaf, significantly increasing the applicability of power-free, self-regulating thermal management technology in applications such as building facades, roofs, and temporary shelters. KAIST announced on November 18 that the research team led by Professor Young Min Song of the School of Electrical Engineering, in collaboration with Professor Dae-Hyeong Kim’s team at Seoul National University, has developed a flexible hydrogel-based ‘Latent-Radiative Thermostat (LRT)’ that mimics the natural heat regulation strategy of the poplar leaf. The LRT developed by the research team is a bio-inspired thermal regulator that autonomously switches between cooling and heating modes. This technology is a new thermal management technique that can simultaneously realize latent heat regulation through the evaporation and condensation of water, and radiative heat regulation using light reflection and transmission, all within a single device. The primary functional material is a composite that integrates lithium ions (Li+) and hydroxypropyl cellulose (HPC) within a polyacrylamide (PAAm) hydrogel. Li+ maintains warmth by condensing and absorbing moisture to regulate latent heat, and HPC changes between transparent and opaque states according to temperature changes, regulating the reflection and absorption of sunlight to switch between cooling and heating modes. When the temperature rises, HPC molecules aggregate, causing the hydrogel to become opaque, which reflects sunlight and strengthens the natural cooling effect. The resulting LRT automatically switches among four thermal management modes based on the surrounding temperature, humidity, and sunlight. <Figure 1. Schematic of a hydrogel-based self-regulating temperature controller inspired by the thermal management strategy of poplar leaves.> ▶ In night/cold environments below the dew point temperature, it maintains warmth by absorbing and condensing moisture in the air and releasing heat. ▶ On cold days with weak sunlight, it transmits sunlight and the absorbed moisture absorbs near-infrared radiation to produce a heating effect. ▶ In hot and dry conditions, internal moisture evaporates, resulting in powerful evaporative cooling. ▶ Under strong sunlight and high-temperature conditions, the HPC becomes opaque to reflect sunlight, and simultaneously, evaporative cooling operates to lower the temperature. That is, it is a bioinspired thermal management device that autonomously switches between cooling and heating modes according to the surrounding environment without requiring power. Through this research, the LRT has demonstrated the performance to stay cooler in the summer and warmer in the winter. The research team confirmed that the thermal regulation properties can be finely tuned to various climate conditions by adjusting the concentrations of Li+ and HPC, and the durability and mechanical strength of the material were significantly improved by adding TiO2 nanoparticles. In outdoor experiments, the LRT maintained temperatures up to 3.7 °C lower in the summer and up to 3.5 °C higher in the winter compared to conventional cooling materials. Furthermore, a simulation covering 7 climate zones (ASHRAE standards) showed an annual energy saving of up to 153 MJ/m2 compared to existing roof coatings. This study is a case of the engineering implementation of the sophisticated thermal management strategies observed in nature. It is anticipated to serve as a next-generation thermal management platform for environments where power-based cooling and heating are difficult, such as building facades, roofs, and temporary shelters. <Figure 2. Outdoor temperature measurement results and simulated energy savings.> In a statement, Professor Young Min Song said, “This research is significant as it technically reproduced nature's intelligent thermal regulation strategy, presenting a thermal management device that self-adapts to seasonal and climate changes. It can be expanded into an intelligent thermal management platform applicable to various environments in the future.” This study was co-first authored by PhD candidate Hyung Rae Kim (School of Electrical Engineering, KAIST). Professor Young Min Song (School of Electrical Engineering, KAIST) participated as a corresponding author. The research was published online on November 4th in Advanced Materials (IF 26.8), a world-leading journal in the field of material science. ※ Paper Title: Hydrogel Thermostat Inspired by Photoprotective Foliage Using Latent and Radiative Heat Control, DOI: https://doi.org/10.1002/adma.202516537 This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government(MSIT) (RS-2025-16063568, RS-2025-16902996, RS-2023-NR077254, RS-2022-NR068140). This work was supported by the InnoCORE program of the Ministry of Science and ICT(GIST InnoCORE KH0830). This work also was supported by the Technology Innovation Program(or Industrial Strategic Technology Development Program-Bio-industry Technology Development Project)(RS-2024-00467230, Development of a Digital Healthcare Device for Non-invasive Continuous Monitoring of Myocardial Infarction Biomarkers Based on Mid-Infrared Nano-Optical Filters) funded By the Ministry of Trade Industry & Energy(MOTIE, Korea)
2025.11.18 View 1909